JIMI Electronic

Your Personal GPS Tracker is pretty darned useful even if you can’t connect it to your computer. With your receiver, you can find your way around as well as your way back, even if you don’t know what a computer is. The ability to connect your GPS receiver to your computer, however, can make your GPS receiver even more useful . . . heck, a lot more useful. Essentially, a connection between your GPS receiver and your computer allows them to talk and share information, such as uploaded maps and waypoints to your receiver as well as downloaded receiver information that you store while on your adventures. In this Blog, I show you why this interconnectivity is a fantastic addition to your receiver. You’ll discover the ins and outs of the physical connections, how to get your computer and receiver to speak the same language, the lowdown on great receiver utility programs, and how to upgrade your receiver firmware. About (Inter)Face: Connectivity Rules If you choose to use a mapping ...

After considering all the options, making your list, checking it twice, and finding out which GPS receivers are naughty and nice, you’ve finally come to that blessed event where you’re the proud owner of a GPS receiver. But before you step out the door for a 100-mile wilderness trek or cross-country road trip, intent on relying on your new electronic gadget as a guide, be sure spend some time getting to know your Mini GPS Trackers . A good place to start your GPS familiarization process is with the user manual. Many GPS receivers have a quick-start guide that gets you up and running in a matter of minutes. These guides are perfect for those impatient, got-to-haveit-now people; however, I suggest that you also take the time to read the full user manual. Otherwise, you could miss out on some important information contained in the full user manual. In addition to the user manual, this section will also help you become familiar with your GPS receiver so you can get the most out of it. ...

In the pre-PC days, taking a trip across town, a state, or the country to visit someplace you’d never been before often involved planning worthy of a major expedition. You’d have to carefully check maps, trying to figure out the shortest and fastest routes, guessing when and where you’d need to stop for gas, scribbling down notes, and highlighting roads on paper maps. That’s all changed with inexpensive and easy-to-use street navigation software. Just run a program on your PC and enter the address of your starting point and the final destination. Then, a few mouse clicks later, you’ve got both a map and exact turn-by-turn directions for how to get from Point A to Point B. And as an added bonus, if you have a laptop and Tracker For Car , you can take this software on the road with you, track your location in real-time, and get helpful hints in reaching your destination. (Most street navigation programs also have versions that run on PDAs for ultimate portability.) Several street navig...

GPS Tracking Device that support maps come with a basemap of the region the GPS receiver was sold in (such as North America or Europe) that shows city locations, highways, major roads, bodies of water, and other features. Precisely what the basemaps display varies by manufacturer and model. Although base- maps do provide general information, some GPS receiver users want more detailed maps that show city streets, topographic features, marine navigation aids, or places outside the United States. How long building a map takes depends on the size of the area that you select, how much map detail you want to include, and how fast your PC is. This can range from a minute or less for small areas (such as a metropolitan area) to five or ten minutes for a large map (such as one that includes many different states). How much time it takes to upload a map into a GPS receiver also depends on the size of the area you select and how the receiver stores maps. If you’re uploading a large map from...

Altimeter The elevation or altitude calculated by a GPS receiver from satellite data isn’t very accurate. Because of this, some GPS units have altimeters, which provide the elevation, ascent/descent rates, change in elevation over distance or time, and the change of barometric pressure over time. (The rough-and-ready rule is that if barometric pressure is falling, bad weather is on the way; if it’s rising, clear weather is coming.) Calibrated and used correctly, barometric altimeters can be accurate within 10 feet of the actual elevation. Knowing your altitude is useful if you have something to reference it to, such as a topographic map. Altimeters are useful for hiking or in the mountains. On Personal GPS Tracker with an electronic altimeter/barometer, calibrating the altimeter to ensure accuracy is important. To do so, visit a physical location with a known elevation and enter the elevation according to the directions in your user’s guide. Airports are good places to calibrat...

If you use a GPS receiver for your outdoor workouts, one of your biggest decisions will be how to carry the GPS receiver. The simplest way is just to hold it in your hand, if it’s free. Of the number of other different ways to carry a GPS receiver, the best carry methods will Provide optimal GPS satellite signal reception: Where you work out might dictate how you carry your GPS receiver. If you live on the plains (flat) without any trees and have excellent satellite reception, you have more options than in the Pacific Northwest (heavy tree canopies). Be comfortable : Carrying a GPS receiver should not distract you from your workout. However you carry it, it should be comfortable, and you really shouldn’t notice carrying or wearing it. Here are some different ways to carry a GPS receiver while working out. How you carry a GPS receiver usually ends up being a personal preference. Try a few of these methods to see which one works best for you. Armbands Armbands, especially w...

Many organizations believe that the Wireless Security Cameras often are not well suited to maintain the entire system because many contractors do not employ adequate IT-trained service technicians. That will change. At the same time, many IT service organizations are discovering that they can install and service IT-based security systems. Some of these organizations are rushing in to fill the void. IT-based integrated security systems must be maintained by a group that is competent in the maintenance of IT systems. That is often not the installing security contractor, whose competence is limited to the edge devices and software. I often recommend that maintenance of the IT infrastructure, operating systems, and software be placed under the authority of the organization’s IT department. Many TCP/IP-based security systems are installed without encryption or any other type of network security. I am fascinated by a security industry that does not secure its own systems. This could be...