A new architecture for Wireless Security Camera System

A new architecture for alarm/access control systems begin to emerge in the near future. Unlike existing alarm/access control system architectures that wire a number of field devices from doors and alarms back to a closet where there is an alarm/access control panel, expect to see a new architecture in which each door may be served by its own individual controller, locally at the door. This has taken place. This allows for the connection of one or two card readers, door position switch, request-to-exit device, low-power door lock, one or two digital cameras, and a digital intercom (on Ethernet connections) all on the microcontroller.

Digital integrated Wireless Security Camera System often interface to legacy analog systems. Legacy access card technologies present a simple challenge. TWIC cards are a good way to migrate from older cards to newer ones. Interfacing multiple access control systems requires an alarm management system that can receive signals from multiple other systems. This allows the monitoring of alarms across the various systems and the control of remote doors and gates. Centralized monitoring can be achieved by using a central station alarm receiver. The printer output of some alarm/access control systems can be interfaced to some digital video systems to graph alarms. With all access control systems, the alarms can be programmed to trigger dry-contact outputs that can be read by an input of a codec on a digital video system and interpreted to an alarm map.

Legacy video systems can be interfaced using a variety of methods. There is no consistent method that works with all types and brands. Proprietary digital systems have a limited ability to interface to other systems, making them more difficult to develop into a true enterprise system. Nonproprietary software-based systems are often easier to interface with a wider variety of legacy systems from many manufacturers. Analog switches can be controlled from the data interface of the switch. Multiplexers do not interface so easily and may require immediate conversion to a digital technology. Legacy intercom systems can be adapted to digital by using a codec and/or intercom interface module. Direct ring-down intercom systems do not have an interface. Switched intercom bus systems can be interfaced similarly to four-wire systems. Older intercom matrix switches can be very difficult to convert. Some newer systems have a data interface. Emerging technologies include local access control system controllers at each door, digital light field cameras, advancements in digital signal processing cameras, and extreme low light color GSM Camera .

The hunt for wireless networking devices should include more than a search for access points or active WiFi clients. It should also include the location and identification of wireless camera systems in the target area.These devices can be used to monitor targets, gain privileged information, or determine the exact schedule of operations within a target for a larger-scale compromise. Most popular wireless cameras operate on the 2.4 GHz frequency range.This range is controlled differently in various countries, and the assessor must understand what channels are available to customers in those countries. There are a number of tools that can be used to perform a wireless video assessment, including video scanners, camera finders, and wireless camera receiver technology.The actual tools used should be determined by the assessment team and fit the customer requirements. The functionality of these tools allows you to find wireless signals transmitting on the 2.4 GHz, 900 MHz, and 1.2 GHz ranges.You can locate wireless cameras, view the actual images from the cameras, operate in a mobile fashion, triangulate in on a specific transmission, and determine the signal strength at various distances from the target site.

More information at http://www.jimilab.com/blog/ .